V70001065 - Kombi Auto DN65, 20 ... 100kPa, Flow 1…47.6 m³/h

The V7000 Kombi-Auto differential pressure control valve is used to maintain automatically a hydronic balance in residential or commercial hydronic heating and cooling systems. It shall be installed in the return pipeline.

It is used in systems with variable volume flows, for example two-pipe heating systems, and creates a hydronic balance by keeping differential pressure over consumers at a constant preset level even under changing flow or pump pressure conditions, for example in part load states. Hydronic balance is a significant requirement for efficient operation of a hydronic system. In an unbalanced system under- or oversupply of energy to individual circuits or heat exchangers can occur. Apart from correct selection of radiator valves, regulation of individual circuits is necessary and in some countries required by national standards or regulations.

• Automatic balancing of differential pressure
• Highest energy saving potential due to efficient energy transfer and minimised pump speed
• Lower noise emission on control valves
• High authority over the control valves
• Dividing systems into pressure independent zones
• No complex calculation needed for selection
• No balancing method needed for commissioning
• Wide range of application
• Wide presetting ranges
• Easy commissioning
• Presetting by hand without the need of tools
• Maintenance friendly
• Shut-off function
• Various measuring possibilities for problematic applications
• Materials: Body and Bonnet made of cast iron EN GJL250; Spring housing made of aluminium, Epoxy coated inside-outside; Inside trim made of brass CuZn40Pb2; Seat seal and O-Ring made of EPDM; Membrane made of EPDM - reinforced; Spring made of stainless steal; Handwheel made of carbon steel; Adapter made of brass CuZn39Pb3