Resideo Logo

D05FT-3/4CGB 20 mm Hot Water Pattern Pressure Reducing Valve

SKU: D05FT-3/4CGB

Resideo Logo

D05FT-3/4CGB 20 mm Hot Water Pattern Pressure Reducing Valve

SKU: D05FT-3/4CGB

The Braukmann D05FT pressure reducing valves protect domestic drinking water installations against high pressure and pressure surges in the supply lines according the EN 806-2. Within the range of their specifications, the D05FT is suitable for domestic, industrial and commercial installations.

Resideo Logo

D05FT-3/4CGB 20 mm Hot Water Pattern Pressure Reducing Valve

SKU: D05FT-3/4CGB

Product overview

The Braukmann D05FT pressure reducing valves protect domestic drinking water installations against high pressure and pressure surges in the supply lines according the EN 806-2. Within the range of their specifications, the D05FT is suitable for domestic, industrial and commercial installations.By installing a pressure reducing valve, pressurization damage is avoided and water consumption is reduced. The set pressure is also maintained constant, even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation.

  • Suitable for hot water systems
  • Inlet pressure balancing - no influence on outlet pressure by fluctuating inlet pressure
  • The valve insert is made of dezincification resistant brass and can be fully exchanged
  • The outlet pressure is set by turning the adjustment knob
  • The set pressure is directly indicated on the set point scale
  • The adjustment spring is not in contact with the drinking water
  • With internal and external threads 1/2"- 1"; with external threads 1 1/4"- 2"

Specifications

Application Potable, Reducing Excessive Pressure
Valve Type Pressure Reducing Valve
Ambient Operating Temperature (Max) 70 °C
Approvals and Standards WRAS approved (AGB-versions ½ in – 1 in), WRAS in progress (AGB-versions 11/4 in – 2 in and CGB-versions)
Connection Size ½ in-1, 1 ¼ -2 in
Connection Type Internal Thread, External Thread
Includes M38T-A10 Pressure gauge, DS05 Insulation shells, ZR06K Double ring wrench, VST06AGB Connection set
Inlet Pressure (Max) 16 bar
Media Temperature (Max) 70 °C
Outlet Pressure (Max) 6 kPa, 3 bar
Outlet Pressure (Min) 1.5 kPa, 3 bar
Product Height 123 mm
Product Length 144 mm
Product Width 95 mm
Seal Material EPDM Rubber, EPDM Rubber
Valve Body Material Brass
Valve Body Pattern Two-way
DN Size DN 20
Flow Coefficient 3.5 Kvs m³/h
Controlled Media Drinking Water
Pressure Drop (Min) 1 bar
Valve Diaphragm Material EPDM
Valve Flow Insert Material Brass
Ambient Relative Humidity (Max) 85% Non Condensing
Ambient Relative Humidity (Min) 25% Non Condensing
Fitting Type Compression
Number of Gauge Taps 1
Flow Coefficient (Max) 3.5 Kvs
Number of Fittings 2