High Limit Aquastat Controller with a range of 100 °F to 240 °F
SKU: L4103A1100/B
High Limit Aquastat Controller with a range of 100 °F to 240 °F
SKU: L4103A1100/B
An immersion-type control the Aquastat® Controller senses water temperature, cycles the burner through the oil primary, or provides water temperature regulation for gas system
Requires Pro for installation
High Limit Aquastat Controller with a range of 100 °F to 240 °F
SKU: L4103A1100/B
Resources
| Application | High Limit |
|---|---|
| Approvals and Standards | UL Component Recognized: File No. MP466, Guide No. MBPR2 |
| Compatible With | Oil-Fired Water Heaters |
| Includes | Scale marked- Hot-Normal-Warm |
| Mounting Type | Mounts on a horizontal immersion well in water heater wall |
| Differential Temperature | 7 °F ± 4 °F, 3.9 °C ± 2 °C |
| Limit Stop | 150 °F, 66 °C |
| Operating Temperature (Min) | 100 °F, 38 °C |
| Operating Temperature (Max) | 240 °F, 116 °C |
| Electrical Ratings at Full Load | 8 A @ 120 V AC, 5.1 A @ 240 V AC |
| Electrical Ratings at Locked Rotor | 48 A @ 120 V AC, 30.6 A @ 240 V AC |
| Switch Action | Contacts break on temperature rise |
| Switch Type | SPST |
| Well Spud Size | 3/4 in NPT, 19 mm NPT |
| Insulation Depth | 2.25 in, 57 mm |
| Product Height | 3.88 in |
| Product Width | 4.09 in |
| Hazmat Information | UN 1294, TOLUENE, 3, II |
This product must be installed by a qualified/licensed contractor and set up with properly calibrated test equipment. Failure to have the installation performed by a qualified professional could result in substantial property damage, and even severe personal injury or death, and Resideo will not be responsible for any damages or injuries resulting from not observing this warning.
